| 
Danfoss EV220B 15-50BD and SS
2/2 Way serve operated valve, DZR brass and stainless steel design. For slightly aggressive liquids and gases
- For robust industrial application
- For neutral and aggressive liquids and gases
- Differential pressure: up to 16 bar
- Coil enclosure: up to IP67
- Connection : From G 1/2 to G2
- Water hammer damped
- Built-in filter for protection of pilot system
- EPDM versions WRAS approved
-
| Technical Data: |
|
| Pressure range : |
EPDM 0.3 to 16 bar. FKM 0.3 to 10 bar |
| Ambient temperature : |
with coil type : BA, up to 40oC
with coil type:BB, BE and BG up to 80oC |
| Media temperature : |
EPDM: -30oC to 120oC (Max. +140oC for low pressure steam
FKM : 0 to 100oC |
| Viscosity : |
Max. 50cSt |
| Materials : |
Valve body : Dezincification resistant brass or stainless steel |
| |
Valve plate : EPDM or FKM |
| |
Orifice : Stainless steel |
| |
Valve plate : EPDM or FKM |
| |
Diaphragm : EPDM or FKM |
| |
O-rings : EPDM or FKM |
-
| Connection |
Kv Value (m3 / h) |
Orifice (mm) |
Seal* Material |
Type designation |
Code No. without coil |
Differential pressure (bar) based on all coil types |
| Main Type |
Specification |
Min. |
Max. |
| Ordering - Stainless steel; normally closed version. |
| G 1/2 |
4 |
15 |
EPDM |
EV220B15SS |
G12ENC000 |
032U8500 |
0.3 |
16 |
| G 1/2 |
4 |
15 |
FKM |
EV220B15SS |
G12FNC000 |
032U8506 |
0.3 |
10 |
| G3/4 |
8 |
20 |
EPDM |
EV220B20SS |
G34ENC000 |
032U8501 |
0.3 |
16 |
| G 3/4 |
8 |
20 |
FKM |
EV220B20SS |
G34FNC000 |
032U8507 |
0.3 |
10 |
| G 1 |
11 |
25 |
EPDM |
EV220B25SS |
G1ENC000 |
032U8502 |
0.3 |
16 |
| G 1 |
11 |
25 |
FKM |
EV220B25SS |
G1FNC000 |
032U8508 |
0.3 |
10 |
EPDM seals for use on water or glycol
FKM seals for use on more aggressive media |
