Metrix拥有广泛的振动产品线来满足您对于振动监测需要。我们的变送器、加速度计、传感器和附件能够有效保护您的机器并符合您的预算。Metrix has a wide range of seismic solutions to meet your vibration monitoring requirements. Our transmitters, accelerometers, sensors and accessories protect your machinery and stay within your budget.

Metrix震动变送器（4-20mA,环路供电)
Vibration Transmitters (4-20 mA, Loop-Powered)

	ST5484E Velocity Transmitter速度变送器 — Loop terminals with IPT— (Independent Polarity Terminal) to prevent incorrect wiring — Temperature shock protected and widest frequency range available — Available options: flying leads, terminal block or 2-pin MS connector
	ST5491E Indicating Velocity Transmitter带显示功能变送器 — Built-in protection against temperature shock and “ski slope” problem — Different mounting studs and high and low pass filters available — Most stable detection circuit
	ST6900 Compact Transmitter Series系列紧凑型变送器 — 4-20 mA proportional to acceleration (ST6911) — 4-20 mA proportional to velocity (ST6917) — Interfaces with PLC, DCS and 4-20 mA monitors — Widest operating temperature in its class

Metrix冲击变送器和仪表
Impact Transmitter and Meters

	IT6810/IT6811/IT6812 — Measures mechanical looseness such as loose rod nuts, broken or loose bolts, liquids in the process, excessive clearance in slipper, loose or worn pins, etc. — 4-20 mA output, 2-pin MS connector — Loop-powered, self-contained sensor — Available options: flying leads, terminal block or 2-pin MS connector
	6850-001 Impact Meter冲击型显示仪 — Select transmitter’s Pulse-Time, 4-20 mA or Peak Detect mode — One device for transmitter checkout and setup, eliminates need for oscilloscope and voltmeters — Battery-powered with digital display — Waveform access through BNC connector
	6850-003 Impact Meter Kit仪表设备 — Hard shell carrying case with protective, form fitting foam inside — Will store and protect one IT6810 transmitter, one 6850 meter, mounting hardware, screw driver and manual. — Comes standard with extra Impact Transmitter mounting bolt, sealing screws and screw driver.

Metrix Velocity Sensors速度传感器

	5485C High-Temp. Sensor高温型传感器 — Provide accurate, repeatable vibration measurements over wide ranges of amplitude and frequency by employing zero friction coil suspension — Self-generating, no power required — Stainless steel housing — Constructed for continuous operation at elevated temperatures
	SV6300 Piezoelectric Sensor压电式速度传感器 — Replace a moving coil velocity transducer with this solid-state sensor — Consists of a temperature stabilized piezoelectric sensor and amplifier packaged in stainless steel case — Immune to cross axis vibration, mount in any axis — Provides high-level, low impedance output for connection to a 4-20 mA transmitter

加速度计 Metrix Accelerometers

SA6200A Industrial Accelerometer工业加速度计 — High-accuracy and repeatability yet priced within budget — Eliminate false indications caused by high frequency noise rectified as low frequency using patented anti-ski slope technology — Highest accuracy and widest frequency response

Metrix High Temperature Accelerometer Model SA6350 accelerometer is ideally suited for vibration monitoring of gas turbines and other high temperature machines. The piezoelectric accelerometer is integrally connected to a charge amplifi er. When used with the Metrix 5535/45 transmitter for accelerometer, a 4-20 mA signal proportional to acceleration or velocity is available. The accelerometer is electrically isolated from the stainless steel case and cable.

Metrix Signal Conditioners信号调节器

5534/5544/5535/5545 Signal Conditioner and Transmitter信号调节和变送器 — 4-20 mA proportional to vibration level — Significant savings over rack mount monitors — Sensor/cable input “OK” light — Available Options: display, filter and/or galvanic isolation