|
Hydraulics, Inc. 快速接头
SWIVELS, COUPLINGS, AND CONTROLS FOR HYDRAULIC SYSTEMS
SWIVELS；S-Inline，HS-Heavy Duty Inline，9S-90° Swivel，9SS-Dual Plane Swivel，18S-Parallel Plane Swivel，Flange Swivels
SWIVELS旋转接头
特点和优势Features and Advantages
本网站描述的液压传动旋转接头包括可用于流体动力系统的最完整的旋转接头尺寸和配置范围。对旋转接头类型、几何关系及其包括SAE和/或ISO流体端口连接器的组合给予了相当大的关注。以前不可用的端口类型作为标准产品提供。Hydraulics, Inc. fluid conducting swivel joints described in this website include the most complete range of swivel joint sizes and configurations available for use in fluid power systems. Considerable attention is placed on swivel types, geometric relations, and their inclusive combinations of connectors for SAE and/or ISO fluid ports. Port types not previously available are included as standard offerings.
功能Function
在需要旋转的地方，液压系统公司提供的长期品种为系统开发人员提供了选择具有流体端口几何关系的旋转体的机会，这些旋转体补充了系统流体端口之间的运动。这些产品为设计者提供了改进现有概念的机会，并采取了不同的方法来进行新的设备设计。Where swivels are required, the long standing variety offered by Hydraulics, Inc., provide system developers the opportunity to select swivels having geometric relations of fluid ports that compliment the movement between a systems fluid ports. These products offer designers an opportunity to improve existing concepts and take a different approach to new equipment design.
应用Application
此处列出的碳钢旋转阀包括广泛的可接受流量、多种端口类型和高达6000 psi的压力额定值。这些特性使液压系统公司的旋转装置适用于许多流体动力系统。从1966年开始，水龙头的设计已经证明在各种流体系统中都是成功的。自1955年以来，可靠性和质量标准一直是公司的传统，在这些产品中普遍采用。The carbon steel swivels listed herein, encompass a broad range of accepted flow volume, variety of port types, and pressure ratings as high as 6,000 psi. These attributes make Hydraulics, Inc. swivels suitable for use in many fluid power systems. Beginning in 1966, the swivel design has proven successful throughout a broad variety of fluid systems. The same standards of dependability and quality that have been a company tradition since 1955 are prevalent in these products.
CAUTION!
不要试图在压力下断开和拆卸旋转装置。在压力下，不要从阀杆上拆下旋转筒。不要试图操作损坏的旋转接头，也不要操作显示油液泄漏和/或明显轴承磨损的旋转接头。所选旋转接头及其附属部件组装时的压力额定值不应超过组装部件压力额定值的最低值。请参阅安全信息，选择和使用液压系统，包括旋转接头。Do not attempt to disconnect and disassemble swivels under pressure. Do not remove the swivel barrel from stem while under pressure. Do not attempt to operate damaged swivels and do not operate swivels displaying fluid leak and/or obvious bearing wear. The pressure rating of the selected swivel, in assembly with it's attached components, should not exceed the lowest of the assembled component's pressure rating. Refer to Safety Information, Selecting and Using Hydraulics, Inc. Swivel Joints.
此处所示的技术信息是基于受控条件下的实际测试结果。数据被认为是可靠的，但是考虑到流体动力系统的多样性和旋转可能遇到的操作条件，用户仅负责通过自己的分析和测试来确保所选产品的性能。Technical Information shown herein is based on actual test results under controlled conditions. The data is considered to be reliable, however considering the diversity of fluid power systems and the operating conditions which swivels may encounter, the user is solely responsible for assuring performance of selected products through it's own analysis and testing.
Hydraulics, Inc. reserves the right to change the design and/or specifications of it's products without notice.
DANGER!
这些产品仅用于流体动力系统中的液体输送。不正确选择或不正确使用这些产品和/或本文所述系统或其他相关物品可能导致死亡、人身伤害和财产损失。These products are for liquid transfer in fluid power systems only. Failure from improper selection, or improper use of these products and/or the systems described herein or other related items can cause death, personal injury and property damage.
Hydraulics Inc.
PRODUCTS
Swivels
Couplings
Seal Kits
Rapid Response Torque Control
Hydraulic Throttle Control
SWIVELS
S-Inline
HS-Heavy Duty Inline
9S-90° Swivel
9SS-Dual Plane Swivel
18S-Parallel Plane Swivel
Flange Swivels
COUPLINGS
5TV - Poppet Style
6TV - Poppet Style Flanged Port
TVF - Flat Face Style
E - Refrigerant Only
SEAL KITS
RESOURCES
Swivel Selection
Part # System
Performance Info
Codes / Standards
Safety Info - Swivels
Safety Info - Couplings
Environmental Policies
INDUSTRIES
|
